DS7240V2 Control Panel

The DS7240V2 Control Panel has eight zones expandable to 40, four outputs expandable to 20, and four areas. It is suitable for commercial burglary and residential fire/burglary applications.

Features :

• Eight on-board zones
• Eight programmable Skeds
• RF compatibility
• Up to 32 users with optional key fob operation available
• Four programmable authority levels
• Two communications routing destinations
• 254 event log
• Remote-programmable with RPS
• Optional Door Access Control Module (DACM)
• Network communication option (LAN/WAN)
• Alarm verification inputs and outputs
  
  

Functions :

Alarm Verification Option

Central station personnel are able to verify alarms with a two-way voice session with the premises and/or visually through an on-premises camera connected to the optional rvm4c Remote Video Module.

Eight On-board Zones

The DS7240V2 Control Panel has eight on-board zones. It can have hard-wired expanded zones and wireless zones. Program any of these zones to follow one of 15 zone functions.

The DS7240V2 Control Panel also allows configuration using two resistors for each sensor loop. The control panel monitors two zones for each sensor loop, making 16 on-board zones available. Zone doubling is also available on hard-wired expanded zones.

When programming zones for entry or exit delay times, you can choose a longer delay time for zones located a longer distance from the keypad.

Authority Levels and PINs

The system supports 32 Personal Identification Numbers (PIN). The PIN default is four digits, but can range between three and seven digits. Designate an unlimited number of master PINs. Use the master PINs to reprogram existing PINs. Program PINs using up to four different authority levels, which can restrict the PIN from bypassing, testing, and disarming the system.

Locally or Remotely Programmable

The system is completely keypad programmable (DS7447E or DS7447V2 Keypad required). An Installer's Keypad feature is also available that allows quick access to the programming menu.

Remote Programming Software (RPS) is a Windows?-based account management and panel programming and diagnostic utility. It is designed to remotely (or locally using the DX4010i Aux Data pins) set up and program the DS7240V2 Control Panels.